Optimal-Band Analysis for Chlorophyll Quantification in Rice Leaves Using a Custom Hyperspectral Imaging System.

Hyperspectral imaging (HSI) is a promising tool in chlorophyll quantification, providing a non-invasive method to collect important information for effective crop management. HSI contributes to food security solutions by optimising crop yields. In this study, we presented a custom HSI system specifically designed to provide a quantitative analysis of leaf chlorophyll content (LCC). To ensure precise estimation, significant wavelengths were identified using optimal-band analysis. Our research was centred on two sets of 120 leaf samples sourced from Thailand's unique Chaew Khing rice variant. The samples were subjected to (i) an analytical LCC assessment and (ii) HSI imaging for spectral reflectance data capture. A linear regression comparison of these datasets revealed that the green (575 ± 2 nm) and near-infrared (788 ± 2 nm) bands were the most outstanding performers. Notably, the green normalised difference vegetation index (GNDVI) was the most reliable during cross-validation (R2=0.78 and RMSE = 2.4 µg∙cm-2), outperforming other examined vegetable indices (VIs), such as the simple ratio (RED/GREEN) and the chlorophyll index. The potential development of a streamlined sensor dependent only on these two wavelengths is a significant outcome of identifying these two optimal bands. This innovation can be seamlessly integrated into farming landscapes or attached to UAVs, allowing real-time monitoring and rapid, targeted N management interventions.

Biogenic nanosilver-fabricated endotracheal tube to prevent microbial colonization in a veterinary hospital.

COVID-19 patients have often required prolonged endotracheal intubation, increasing the risk of developing ventilator-associated pneumonia (VAP). A preventive strategy is proposed based on an endotracheal tube (ETT) modified by the in situ deposition of eucalyptus-mediated synthesized silver nanoparticles (AgNPs). The surfaces of the modified ETT were embedded with AgNPs of approximately 28 nm and presented a nanoscale roughness. Energy dispersive X-ray spectroscopy confirmed the presence of silver on and inside the coated ETT, which exhibited excellent antimicrobial activity against Gram-positive and Gram-negative bacteria, and fungi, including multidrug-resistant clinical isolates. Inhibition of planktonic growth and microbial adhesion ranged from 99 to 99.999% without cytotoxic effects on mammalian cells. Kinetic studies showed that microbial adhesion to the coated surface was inhibited within 2 h. Cell viability in biofilms supplemented with human tracheal mucus was reduced by up to 95%. In a porcine VAP model, the AgNPs-coated ETT prevented adhesion of Pseudomonas aeruginosa and completely inhibited bacterial invasion of lung tissue. The potential antimicrobial efficacy and safety of the coated ETT were established in a randomized control trial involving 47 veterinary patients. The microbial burden was significantly lower on the surface of the AgNPs-coated ETT than on the uncoated ETT (p < 0.05). KEY POINTS: • Endotracheal tube surfaces were modified by coating with green-synthesized AgNPs • P. aeruginosa burden of endotracheal tube and lung was reduced in a porcine model • Effective antimicrobial activity and safety was demonstrated in a clinical trial.

Eucalyptus-Mediated Synthesized Silver Nanoparticles-Coated Urinary Catheter Inhibits Microbial Migration and Biofilm Formation.

Catheter-associated urinary tract infections (CAUTIs) are significant complications among catheterized patients, resulting in increased morbidity, mortality rates, and healthcare costs. Foley urinary catheters coated with synthesized silver nanoparticles (AgNPs) using Eucalyptus camaldulensis leaf extract were developed using a green chemistry principle. In situ-deposited AgNPs with particle size ranging between 20 and 120 nm on the catheter surface were illustrated by scanning electron microscopy. Atomic force microscopy revealed the changes in surface roughness after coating with nanoparticles. The coated catheter could significantly inhibit microbial adhesion and biofilm formation performed in pooled human urine-supplemented media to mimic a microenvironment during infections (p 0.05). AgNPs-coated catheter exhibited broad-spectrum antimicrobial activity against important pathogens, causing CAUTIs with no cytotoxic effects on HeLa cells. A reduction in microbial viability in biofilms was observed under confocal laser scanning microscopy. A catheter bridge model demonstrated complete prevention of Proteus mirabilis migration by the coated catheter. Significant inhibition of ascending motility of Escherichia coli and P. mirabilis along the AgNPs-coated catheter was demonstrated in an in vitro bladder model (p 0.05). The results suggested that the AgNPs-coated urinary catheter could be applied as an alternative strategy to minimize the risk of CAUTIs by preventing bacterial colonization and biofilm formation.

Prolonged inhibitory effects against planktonic growth, adherence, and biofilm formation of pathogens causing ventilator-associated pneumonia using a novel polyamide/silver nanoparticle composite-coated endotracheal tube.

Microbial cells can rapidly form biofilm on endotracheal tubes (ETT) causing ventilator-associated pneumonia, a serious complication in patients receiving mechanical ventilation. A novel polyamide with a good balance of hydrophilic/hydrophobic moieties was used for the embedment of green-reduction silver nanoparticles (AgNPs) for the composite-coated ETT. The films were conformal with a thickness of ∼ 17 ± 3 µm accommodating high loading of 60 ± 35 nm spherical-shaped AgNPs. The coated ETT resulted in a significant difference in reducing both planktonic growth and microbial adhesion of single and mixed-species cultures, compared with uncoated ETT (p < 0.05). A time-kill assay demonstrated rapid bactericidal effects of the coating on bacterial growth and cell adhesion to ETT surface. Biofilm formation by Pseudomonas aeruginosa and Staphylococcus aureus, commonly encountered pathogens, was inhibited by > 96% after incubation for 72 h. Polyamide/AgNP composite-coated ETT provided a broad-spectrum activity against both Gram-positive and Gram-negative bacteria as well as Candida albicans and prolonged antimicrobial activity.

Green fabrication of anti-bacterial biofilm layer on endotracheal tubing using silver nanoparticles embedded in polyelectrolyte multilayered film.

Endotracheal tubes (ETTs) are a common source of bacterial colonization, leading to ventilator-associated pneumonia (VAP). This research developed a biofilm-resistant ETT, following the principles of green chemistry. Using an aqueous layer-by-layer (LbL) technique, a thick polyelectrolyte multilayered film was deposited on a ventilation tube. The polyelectrolyte multilayered film accommodated silver nanoparticles (AgNPs) formed in situ by reducing Ag+ ions with Eucalyptus citriodora leaf extract. The multilayered film coating conformed to the curved surfaces of the ETT. Film thickness and silver content increased exponentially with the number of polyelectrolyte bilayer pairs, and a sufficiently high AgNPs content of 10-30%w/w was obtained at 75 to 125 bilayer films. Adhesion of the Gram-positive Staphylococcus aureus and Gram-negative Pseudomonas aeruginosa was prevented by 99.9 and 99.99%, respectively, without cytotoxic effects against human lung epithelial cells (p < 0.05).

Fabrication and characterization of periodically patterned silica fiber structures for enhanced second-order nonlinearity: publisher's note.

This publisher's note amends the author list of [Opt. Express23, 8113 (2015)].

Fabrication and characterization of periodically patterned silica fiber structures for enhanced second-order nonlinearity.

We develop and characterize a UV ablation technique that can be used to pattern soft materials such as polymers and nonlinear molecules self-assembled over silica microstructures. Using this method, we fabricate a spatially periodic coating of nonlinear film over a thin silica fiber taper for second harmonic generation (SHG). Experimentally, we find that the second harmonic signal produced by the taper with periodic nonlinear coating is 15 times stronger than the same taper with uniform nonlinear coating, which suggests that quasi-phase-matching is at least partially achieved in the patterned nonlinear silica taper. The same technique can also be used to spatially pattern other types of functional nanomaterials over silica microstructures with curved surfaces, as demonstrated by deposition of gold nanoparticles in patterned structures.

High quality factor silica microspheres functionalized with self-assembled nanomaterials.

With extremely low material absorption and exceptional surface smoothness, silica-based optical resonators can achieve extremely high cavity quality (Q) factors. However, the intrinsic material limitations of silica (e.g., lack of second order nonlinearity) may limit the potential applications of silica-based high Q resonators. Here we report some results in utilizing layer-by-layer self-assembly to functionalize silica microspheres with nonlinear and plasmonic nanomaterials while maintaining Q factors as high as 10(7). We compare experimentally measured Q factors with theoretical estimates, and find good agreement.

Amine-rich polyelectrolyte multilayers for patterned surface fixation of nanostructures.

We describe a lithographic method for directly patterning the adhesive properties of amine-rich layer-by-layer assembled polymer films, useful for positioning metal and other nanostructures. The adhesive properties of the films are sufficiently robust that the films can be patterned with standard as opposed to soft lithographic methods. We perform the patterning with a lithographically defined evaporated aluminum mask which protects selected regions of the substrate, passivating adhesion in the exposed regions with acetic anhydride. When the aluminum is removed with a HCl etch, the protected regions retain their adhesion, whereas particle adsorption is almost completely eliminated in the passivated areas, making it possible to guide adsorption to the protected areas. The high degree of adhesion comes about because of uncoordinated amine groups that pervade the film. Cycling the pH from high values to low and back causes the amines to be rearranged, rejuvenating the adhesive properties of the surface, which is the likely origin of the robustness of the adhesive properties to processing. pH adjustment also causes reversible swelling and deswelling of the film, so that the vertical position and dielectric environment of the nanostructure can be dynamically adjusted, which can be particularly beneficial for tuning the plasmonic resonances of metallic structures.

Demonstration of a cylindrically symmetric second-order nonlinear fiber with self-assembled organic surface layers.

We report the fabrication and characterization of a cylindrically symmetric fiber structure that possesses significant and thermodynamically stable second-order nonlinearity. Such fiber structure is produced through nanoscale self-assembly of nonlinear molecules on a silica fiber taper and possesses full rotational symmetry. Despite its highly symmetric configuration, we observed significant second harmonic generation (SHG) and obtained good agreement between experimental results and theoretical predictions.